PROPRIETARY Solar Tool Steel Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 30 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Solar Tool Steel Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Solar Tool Steel Propiedades físicas
Temperatura
Este material cuenta con 30 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Solar Tool Steel Tratamiento Térmico
- Normalizing: Heating to 899°C and cooling in air. Annealing: Heat to 746/774°C and cool very slowly in the furnace at a rate of no more than 11°C per hour until the furnace is black, then cool naturally. This will produce a max. hardness of Brinell 202; Hardening: Heat the salt bath or furnace to 843°C. Without preheating, place the tool right in the hot furnace near the thermocouple and let it heat naturally until it uniformly matches the color of the thermocouple. Soak five minutes per inch of thickness, then quench in brine. All water hardening steels should be quenched in 5% to 10% brine and may be quenched right down to bath temperatures. Small tools under about 12.7mm in diameter can be heated to 871°C in controlled atmosphere furnaces or neutral salt baths and quenched in oil; Stress relieving: Anneal below the 649/677°C and cool slowly. Tempering: At 149°C to produce a hardness of Rockwell C 59/60. Shanks of pneumatic chisels should be tempered at 482°C. After oil quenching from 871°C, tempering at 135/149°C should be used.
PROPRIETARY Solar Tool Steel Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- -Referencias cruzadas
- 5Composición
- 12Propiedades mecánicas
- 11Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales