PROPRIETARY Solar Tool Steel Tool steels

Material group: Ferrous Alloys / Tool steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: -
Total number of updates: 0

This material has 30 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Solar Tool Steel Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
≤ 0.5000
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Fe
VALUE
Balance
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
≤ 0.4000
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Solar Tool Steel Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.72 — 8 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 30 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Solar Tool Steel Heat Treatments

  • Normalizing: Heating to 899°C and cooling in air. Annealing: Heat to 746/774°C and cool very slowly in the furnace at a rate of no more than 11°C per hour until the furnace is black, then cool naturally. This will produce a max. hardness of Brinell 202; Hardening: Heat the salt bath or furnace to 843°C. Without preheating, place the tool right in the hot furnace near the thermocouple and let it heat naturally until it uniformly matches the color of the thermocouple. Soak five minutes per inch of thickness, then quench in brine. All water hardening steels should be quenched in 5% to 10% brine and may be quenched right down to bath temperatures. Small tools under about 12.7mm in diameter can be heated to 871°C in controlled atmosphere furnaces or neutral salt baths and quenched in oil; Stress relieving: Anneal below the 649/677°C and cool slowly. Tempering: At 149°C to produce a hardness of Rockwell C 59/60. Shanks of pneumatic chisels should be tempered at 482°C. After oil quenching from 871°C, tempering at 135/149°C should be used.

PROPRIETARY Solar Tool Steel Mechanical Properties

Temperature

PROPERTY / VALUE
Rockwell Hardness (HR)
23 — 63
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • -Cross References
  • 5Composition
  • 12Mechanical Properties
  • 11Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers