AA Alclad 6061 アルミニウム合金
材料グループ:
非鉄合金 / アルミニウム合金
国 / 規格:
米国 / AA
データ更新
最新情報: 2022-11
更新の総数: 2
更新履歴
2019-03
この材料には 127 件の特性データがありますが、現在表示されているのは一部のみです。
登録して、温度や条件ごとの詳細データを含む全ての材料特性データにアクセスしましょう。
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
AA Alclad 6061 物理的性質
温度
この材料には 127 件の特性データがありますが、現在表示されているのは一部のみです。
温度や条件ごとの詳細な物理データを閲覧
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
AA Alclad 6061 熱処理
- The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.
The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.
The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.
Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.
For sheet
Temper T4: Solution heat treated at 530°C, quenched, naturally aged.
Temper T42: Solution heat treated at 530°C, quenched, naturally aged.
Temper T6: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.
Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.
For plate
Temper T4 (applies only to tread plate): Solution heat treated at 530°C, quenched, naturally aged.
Temper T451: Solution heat treated at 530°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.
Temper T42: Solution heat treated at 530°C, quenched, naturally aged.
Temper T6 (applies only to tread plate): Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.
Temper T651: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours. Stress-relieved by stretching is required to produce a specified amount of permanent set prior to any precipitation heat treatment.
Temper T62: Solution heat treated at 530°C, quenched, precipitation heat treated at 160°C for 18 hours.
AA Alclad 6061 機械的特性
温度
降伏強度, Rp0.2
登録して全ての詳細データを表示
無料アクセスで全データをご利用いただけます
全ての材料データを見る
AA Alclad 6061国際相当材
3件中3を表示しています。
材料
規格
国 / 製造業者
同等のカテゴリ
相当区分は、化学成分および機械的特性の比較に基づいています。実際の用途への適用にあたっては、必ず該当する規格要件に照らして適合性をご確認ください。
用途に最適な材料を選定 - デモを予約
- 3相互参照
- -成分
- 48機械的特性
- 30物理的特性
- 1熱処理
- -金属組織
- -被削性
- 13応力-ひずみ
- -成形性
- 1疲労
- -破壊
- 14クリープ
- 14接合
- -コーティング
- -寸法
- -トライボロジ
- 3腐食
- -時効
- -耐候性
- -照射
- -総仕入先数