PROPRIETARY Micro Melt HS-30 工具鋼（ＩＳＯ仕様）
材料グループ:
鉄合金 / 工具鋼（ＩＳＯ仕様）
国 / 規格:
PROPRIETARY
データ更新
最新情報: 2025-06
更新の総数: 1
更新履歴
この材料には 41 件の特性データがありますが、現在表示されているのは一部のみです。
登録して、温度や条件ごとの詳細データを含む全ての材料特性データにアクセスしましょう。
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
PROPRIETARY Micro Melt HS-30 化学組成
基準
値
単位
CAS 番号
基準
C
値
1.27
単位
%
CAS 番号
7440-44-0
基準
Co
値
8.50
単位
%
CAS 番号
7440-48-4
基準
Cr
値
4.20
単位
%
CAS 番号
7440-47-3
Carpenter Technology Corporation, Product Data Sheets,
材料の詳細な性能データをお探しですか？
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
PROPRIETARY Micro Melt HS-30 物理的性質
温度
この材料には 41 件の特性データがありますが、現在表示されているのは一部のみです。
温度や条件ごとの詳細な物理データを閲覧
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
PROPRIETARY Micro Melt HS-30 熱処理
- Annealing: must be fully annealed after forging and before hardening. For full annealing heat uniformly to 871°C (1600°F), hold at temperature for two hours, cool slowly at 14°C (25°F) per hour maximum in the furnace to below 538°C (1000°F), and air cool to room temperature.
Hardening: Two furnaces are used for hardening. One furnace is used to preheat the workpiece to 816 - 843°C (1500 - 1550°F), and the second is used to rapidly heat the workpiece from the preheating temperature to the hardening temperature of 1163 - 1204°C (2125 - 2200°F) for atmosphere furnaces or 1149 - 1191°C (2100 - 2175°F) for salt baths.
Quenching: Quench in oil or a salt bath maintained at 538 - 593°C (1000 - 1100°F). An interrupted quench is recommended when oil quenching is used, particularly for workpieces of large sections or complicated design. The workpiece should be quenched in oil until it has reached approximately 538 - 593°C (1000 - 1100°F) (dull red color), removed from the oil and allowed to air cool to below 66°C (150°F) or until the workpiece can be touched comfortably with a bare hand. When a salt bath is used, the workpiece is quenched into the bath and held long enough to cool to the bath temperature. It is then removed from the bath and allowed to air cool to below 66°C (150°F) or until it can be touched comfortably with a bare hand. Salt bath quenching of large sections generally results in slightly lower hardness than an interrupted oil quench.
Tempering: Tempering should be performed immediately after quenching and cooling of the workpiece below 66°C (150°F) or as soon as it can be touched comfortably with a bare hand. The tempering temperature may be varied depending on the application and desired hardness. Triple tempering is required. Typical tempering is performed at 552°C (1025°F) for two hours at temperature followed by air cooling to room temperature. This cycle is repeated twice to obtain triple tempering. Tempering below 538°C (1000°F) is not recommended.
PROPRIETARY Micro Melt HS-30 機械的特性
温度
用途に最適な材料を選定 - デモを予約
- -相互参照
- 11成分
- 17機械的特性
- 11物理的特性
- 1熱処理
- -金属組織
- -被削性
- -応力-ひずみ
- -成形性
- -疲労
- -破壊
- -クリープ
- -接合
- -コーティング
- -寸法
- -トライボロジ
- -腐食
- -時効
- -耐候性
- -照射
- 1総仕入先数