PROPRIETARY Tyrax ESR Acciaio inox
Aggiornamenti dei dati
Questo materiale dispone di 44 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY Tyrax ESR Composizione chimica
Uddeholms AB, Product Data Sheets,
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY Tyrax ESR Proprietà fisiche
Temperatura
Questo materiale dispone di 44 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
PROPRIETARY Tyrax ESR Trattamento Termico
- The tensile test samples have been hardened at 1050-1080°C (1920-1975°F), gas quenched in a vacuum furnace and tempered twice at 530°C (985°F) for two hours to the given hardness (56 and 58 HRC).
The compressive strength test samples have been hardened at 1050°C (1920°F), gas quenched in a vacuum furnace and tempered twice at 525°C (980°F) for two hours to the given hardness.
Soft annealing: Protect the steel and heat through to 860°C (1580°F). Then cool in the furnace at 10°C/h to 650°C (1200°F), then freely in air.
Stress relieving: After rough machining the tool should be heated through to 650°C (1200°F) and held for 2h. Cool slowly to 500°C (930°F), then freely in air.
Hardening: Preheating temperature: 600-850°C (1110-1560°F). Austenitizing temperature: 1050-1080°C (1920-1975°F). Holding time: 30 minutes.
Sub-Zero treatment: Cryo-treatment in liquid nitrogen (-120°C to -196°C (-185°F to -320°F)) may be carried out for tools with high demands on dimensional stability after heat treatment. This treatment should be performed before tempering. Intricate shapes should however be avoided because of the risk of cracking.
PROPRIETARY Tyrax ESR Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
Materiali equivalenti internazionali di PROPRIETARY Tyrax ESR
Visualizzazione di 1 risultati su 1.
Le categorie di equivalenza si basano sul confronto della composizione chimica e delle proprietà meccaniche. Si raccomanda di verificare sempre l'idoneità del materiale rispetto alla specifica e all'applicazione prevista.
Hai bisogno dell'elenco completo dei 1 equivalenti internazionali?
Visualizza tutti i 1 gradi equivalenti con una mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 1Riferimenti incrociati
- 7Composizione
- 18Proprietà meccaniche
- 13Proprietà fisiche
- 2Trattamento Termico
- -Metallografia
- -Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- -Strisciare
- 1Giunzioni
- -Rivestimenti
- -Dimensioni
- -Tribologia
- -Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- 2Fornitori Totali