PROPRIETARY Tyrax ESR Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 44 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Tyrax ESR Composición química
Uddeholms AB, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Tyrax ESR Propiedades físicas
Temperatura
Este material cuenta con 44 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Tyrax ESR Tratamiento Térmico
- The tensile test samples have been hardened at 1050-1080°C (1920-1975°F), gas quenched in a vacuum furnace and tempered twice at 530°C (985°F) for two hours to the given hardness (56 and 58 HRC).
The compressive strength test samples have been hardened at 1050°C (1920°F), gas quenched in a vacuum furnace and tempered twice at 525°C (980°F) for two hours to the given hardness.
Soft annealing: Protect the steel and heat through to 860°C (1580°F). Then cool in the furnace at 10°C/h to 650°C (1200°F), then freely in air.
Stress relieving: After rough machining the tool should be heated through to 650°C (1200°F) and held for 2h. Cool slowly to 500°C (930°F), then freely in air.
Hardening: Preheating temperature: 600-850°C (1110-1560°F). Austenitizing temperature: 1050-1080°C (1920-1975°F). Holding time: 30 minutes.
Sub-Zero treatment: Cryo-treatment in liquid nitrogen (-120°C to -196°C (-185°F to -320°F)) may be carried out for tools with high demands on dimensional stability after heat treatment. This treatment should be performed before tempering. Intricate shapes should however be avoided because of the risk of cracking.
PROPRIETARY Tyrax ESR Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Tyrax ESR Materiales Internacionales Equivalentes
Mostrando 1 de 1 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 1 internacionales equivalentes?
Consulte los grados 1 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 1Referencias cruzadas
- 7Composición
- 18Propiedades mecánicas
- 13Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- 1Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 2Proveedores Totales