PROPRIETARY Tyrax ESR Stainless steels
Data updates
This material has 44 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Tyrax ESR Chemical Composition
Uddeholms AB, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Tyrax ESR Physical Properties
Temperature
This material has 44 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Tyrax ESR Heat Treatments
- The tensile test samples have been hardened at 1050-1080°C (1920-1975°F), gas quenched in a vacuum furnace and tempered twice at 530°C (985°F) for two hours to the given hardness (56 and 58 HRC).
The compressive strength test samples have been hardened at 1050°C (1920°F), gas quenched in a vacuum furnace and tempered twice at 525°C (980°F) for two hours to the given hardness.
Soft annealing: Protect the steel and heat through to 860°C (1580°F). Then cool in the furnace at 10°C/h to 650°C (1200°F), then freely in air.
Stress relieving: After rough machining the tool should be heated through to 650°C (1200°F) and held for 2h. Cool slowly to 500°C (930°F), then freely in air.
Hardening: Preheating temperature: 600-850°C (1110-1560°F). Austenitizing temperature: 1050-1080°C (1920-1975°F). Holding time: 30 minutes.
Sub-Zero treatment: Cryo-treatment in liquid nitrogen (-120°C to -196°C (-185°F to -320°F)) may be carried out for tools with high demands on dimensional stability after heat treatment. This treatment should be performed before tempering. Intricate shapes should however be avoided because of the risk of cracking.
PROPRIETARY Tyrax ESR Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Tyrax ESR International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 7Composition
- 18Mechanical Properties
- 13Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 1Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers