B.S. 509-690 Acciai strutturali e da costruzione
Aggiornamenti dei dati
Questo materiale dispone di 60 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
B.S. 509-690 Composizione chimica
BS 1502: 1982 / Specifiche per acciai per recipienti a pressione con e senza combustione: profilati e barre
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
B.S. 509-690 Proprietà fisiche
Temperatura
Questo materiale dispone di 60 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
B.S. 509-690 Trattamento Termico
- Austenitizing: 770-820°C;
Tempering: 540-600°C - Forgings shall be given other a double-refining or single-refining heat treatment as specified below.
Forgings of greater than 75 mm ruling section shall be quenched in oil or water at the final refining stage.
The double-refining heat treatment shall consist of:
(a) normalizing or quenching in oil or water from a temperature within the range 880°C to 920°C; followed by
(b) normalizing or quenching in oil or water from a temperature within the range 780°C to 820°C; followed by
(c) tempering at a temperature within the range 560°C to 600°C. The forgings shall be held at the tempering temperature for not less than 1h for each 25 mm of thickness and quenched in air, oil or water. The rate of cooling shall be as fast as is practicable and not less than 170 °C/h down to a temperature of 200°C.
The single-refining heat treatment shall consist of:
(1) normalizing or quenching in oil or water from a temperature within the range 780°C to 820°C; followed by
(2) tempering at a temperature within the range 560°C to 600°C. The forgings shall be held at the tempering temperature for not less than 1h for each 25 mm of thickness and quenched in air, oil or water. The rate of cooling shall be as fast as is practicable and not less than 170°C/h down to a temperature of 200°C.
Tempered at 560 to 600°C
B.S. 509-690 Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
Materiali equivalenti internazionali di B.S. 509-690
Visualizzazione di 1 risultati su 1.
Le categorie di equivalenza si basano sul confronto della composizione chimica e delle proprietà meccaniche. Si raccomanda di verificare sempre l'idoneità del materiale rispetto alla specifica e all'applicazione prevista.
Hai bisogno dell'elenco completo dei 1 equivalenti internazionali?
Visualizza tutti i 1 gradi equivalenti con una mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 1Riferimenti incrociati
- 29Composizione
- 12Proprietà meccaniche
- 3Proprietà fisiche
- 2Trattamento Termico
- -Metallografia
- -Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- 2Strisciare
- -Giunzioni
- -Rivestimenti
- 11Dimensioni
- -Tribologia
- -Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- -Fornitori Totali