B.S. 509-690 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 60 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
B.S. 509-690 Composición química
BS 1502: 1982 / Aceros para recipientes a presión
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
B.S. 509-690 Propiedades físicas
Temperatura
Este material cuenta con 60 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
B.S. 509-690 Tratamiento Térmico
- Austenitizing: 770-820°C;
Tempering: 540-600°C - Forgings shall be given other a double-refining or single-refining heat treatment as specified below.
Forgings of greater than 75 mm ruling section shall be quenched in oil or water at the final refining stage.
The double-refining heat treatment shall consist of:
(a) normalizing or quenching in oil or water from a temperature within the range 880°C to 920°C; followed by
(b) normalizing or quenching in oil or water from a temperature within the range 780°C to 820°C; followed by
(c) tempering at a temperature within the range 560°C to 600°C. The forgings shall be held at the tempering temperature for not less than 1h for each 25 mm of thickness and quenched in air, oil or water. The rate of cooling shall be as fast as is practicable and not less than 170 °C/h down to a temperature of 200°C.
The single-refining heat treatment shall consist of:
(1) normalizing or quenching in oil or water from a temperature within the range 780°C to 820°C; followed by
(2) tempering at a temperature within the range 560°C to 600°C. The forgings shall be held at the tempering temperature for not less than 1h for each 25 mm of thickness and quenched in air, oil or water. The rate of cooling shall be as fast as is practicable and not less than 170°C/h down to a temperature of 200°C.
Tempered at 560 to 600°C
B.S. 509-690 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
B.S. 509-690 Materiales Internacionales Equivalentes
Mostrando 1 de 1 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 1 internacionales equivalentes?
Consulte los grados 1 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 1Referencias cruzadas
- 29Composición
- 12Propiedades mecánicas
- 3Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- 2Bicho raro
- -Uniones
- -Revestimientos
- 11Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales