PROPRIETARY N2360M Acier pour outils
Mises à jour des données
Ce matériau a 14 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY N2360M Composition chimique
Villares Metals, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY N2360M Propriétés physiques
Température
Ce matériau a 14 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY N2360M Traitement thermique
- Stress Relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: Tempering heat should be between 1000 and 1020°C. It is recommended to pre-warm the tools. Cool in:
Appropriate oil, with agitation and heated between 40 and 70°C.
Molten salt bath, kept between 500 and 550°C.
Calm air.
Tempering: Tools must be tempered immediately after quenching, as soon as they reach 60°C. Make at least 2 tempers and between each temper the parts must cool slowly to room temperature. The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension.
PROPRIETARY N2360M Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 1Références croisées
- 6Composition
- 1Propriétés mécaniques
- 3Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 1Fournisseurs totaux