PROPRIETARY VEX Acier pour outils
Mises à jour des données
Ce matériau a 331 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VEX Propriétés physiques
Température
Ce matériau a 331 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VEX Traitement thermique
- Recommendations to improve tool life: Before starting operation, pre-heat slowly between 200-300°C, to obtain thermal homogenization of core and surface. Apply periodic stress relieving during the use of tools.
Stress Relief: Must be employed after machining and before hardening. The stress relief is necessary in dies with draws and profiles, in which the machining removal has been higher than 30%, in other to minimize distortions after hardening. The procedure employs slowly heating to 500-600°C and furnace cooling until 200°C. After tooling, the stress relief must employ a temperature 50°C lower than that of the last tempering.
Hardening: The austenitizing temperature must be between 980 - 1000°C. Cooling:
a) Pressurized vacuum furnace.
b) Oil between 40 - 70°C.
c) Salt bath between 500 - 550°C.
Tempering: Tools must be tempered immediately after hardening, as soon as they reach 60°C. It is necessary, at least, double tempering. After each tempering, tools must be slowly cooled to room temperature. Tempering temperature is between 550 - 620°C. The time of each tempering must be at least 2 hours. For tools larger than 70 mm, the time should be calculated according to their size.
Nitriding: Recommended when higher levels of surface hardness and high abrasion wear resistance are required. It must be employed after hardening and tempering, since the temperature is at least 30°C lower than the last tempering temperature.
PROPRIETARY VEX Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY VEX Matériaux équivalents internationaux
Affichage de 15 sur 166 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 166 équivalents internationaux ?
Consultez les 166 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 166Références croisées
- -Composition
- 1Propriétés mécaniques
- 4Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 158Fournisseurs totaux