PROPRIETARY No. 883 Tool Steel Acier pour outils
Mises à jour des données
Ce matériau a 231 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY No. 883 Tool Steel Composition chimique
Carpenter Technology Corporation, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY No. 883 Tool Steel Propriétés physiques
Température
Ce matériau a 231 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY No. 883 Tool Steel Traitement thermique
- Annealing: heat uniformly to 843/871°C (1550/1600°F), then cool very slowly in the furnace at a rate of not more than 16.7°C (30°F) per hour until the furnace is black.
Hardening: for air treating, heat the furnace to 1010/1024°C (1850/1875°F), then place the tool right in the hot furnace near the thermocouple. Let the tool heat naturally until it uniformly matches the color of the thermocouple. Soak 20 minutes plus an additional 5 minutes per 25.4 mm of thickness, then air cool. For oil treating, follow the same procedure, but drop the temperature to 996/1010°C (1825/1850°F).
Stress Relieving: first rough machine, then heat to a temperature of 649/677°C (1200/1250°F), hold for 1 hour at temperature, then slowly cool.
Tempering: full hardness is maintained up to a tempering temperature of 538°C (1000°F). For greater toughness, temper at a higher temperature.
PROPRIETARY No. 883 Tool Steel Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY No. 883 Tool Steel Matériaux équivalents internationaux
Affichage de 15 résultats sur 97.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 97 équivalents internationaux ?
Consultez les 97 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 97Références croisées
- 7Composition
- 12Propriétés mécaniques
- 27Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 87Fournisseurs totaux