NMX B-180 Grade 3 Aciers de construction
Mises à jour des données
Ce matériau a 34 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
NMX B-180 Grade 3 Composition chimique
NMX-B-180: 1991 / Tubes en acier sans soudure et soudés pour usage à basse température
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
NMX B-180 Grade 3 Propriétés physiques
Température
Ce matériau a 34 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
NMX B-180 Grade 3 Traitement thermique
- Normalized and tempered: Heat to a uniform temperature of min. 816°C, cooled in air and subsequently reheating to a suitable tempering temperature. Only for seamless pipes, reheat and control the final temperature of process in a range of 845 C to 945°C and cooled in a controlled atmosphere furnace, followed by tempering Seamless pipe Grades 1, 6 and 10 may be heat treated by uniform heating to a temperature not less than 815°C followed by quenching in a liquid bath and subsequently reheating to a suitable tempering temperature, in rather than any of the other heat treatments described in the preceding paragraphs Quenched and tempered: Heated to a uniform temperature of 800°C ± 15°C, and maintaining this temperature for a min. of 2 minutes/in. of thickness or one hour per 25.4 mm thick (not less than 15 minutes) and quenching by immersion in circulating water. Reheat the tubes to reach a uniform temperature between 565°C and 605°C, maintaining this temperature for a time of 2 minutes /mm thick or one hour per 25.4 mm thick (not less than 15 minutes) and cooled in air or water at a rate not less than 165°C/h. Double normalized and tempered: Heated to a uniform temperature of 900°C ± 15°C, and maintain this temperature for a min. of 2 minutes/ in. of thickness, or one hour per 25.4 mm thick (not less than 15 minutes) and cooled in air. Heating again until the tubes reach a uniform temperature of 790°C ± 15°C, holding this temperature for a min. of 2 minutes/mm thick or one hour per 25.4 mm (not less than 15 minutes) and cooled in air. Finally reheated to a uniform temperature of 565°C to 605°C, and maintain this temperature for a min. of 2 minutes/mm thick, or one hour per 25.4 mm (not less than 15 minutes), and cooled in air or water at a speed not less than 165°C/h.
NMX B-180 Grade 3 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
NMX B-180 Grade 3 Matériaux équivalents internationaux
Affichage de 6 résultats sur 10.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 10 équivalents internationaux ?
Consultez les 10 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 10Références croisées
- 6Composition
- 12Propriétés mécaniques
- 3Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 2Fournisseurs totaux