NMX B-180 Grade 3 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 34 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
NMX B-180 Grade 3 Composición química
NMX-B-180: 1991 / Tubería de acero soldada y sin soldadura para baja temperatura
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
NMX B-180 Grade 3 Propiedades físicas
Temperatura
Este material cuenta con 34 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
NMX B-180 Grade 3 Tratamiento Térmico
- Normalized and tempered: Heat to a uniform temperature of min. 816°C, cooled in air and subsequently reheating to a suitable tempering temperature. Only for seamless pipes, reheat and control the final temperature of process in a range of 845 C to 945°C and cooled in a controlled atmosphere furnace, followed by tempering Seamless pipe Grades 1, 6 and 10 may be heat treated by uniform heating to a temperature not less than 815°C followed by quenching in a liquid bath and subsequently reheating to a suitable tempering temperature, in rather than any of the other heat treatments described in the preceding paragraphs Quenched and tempered: Heated to a uniform temperature of 800°C ± 15°C, and maintaining this temperature for a min. of 2 minutes/in. of thickness or one hour per 25.4 mm thick (not less than 15 minutes) and quenching by immersion in circulating water. Reheat the tubes to reach a uniform temperature between 565°C and 605°C, maintaining this temperature for a time of 2 minutes /mm thick or one hour per 25.4 mm thick (not less than 15 minutes) and cooled in air or water at a rate not less than 165°C/h. Double normalized and tempered: Heated to a uniform temperature of 900°C ± 15°C, and maintain this temperature for a min. of 2 minutes/ in. of thickness, or one hour per 25.4 mm thick (not less than 15 minutes) and cooled in air. Heating again until the tubes reach a uniform temperature of 790°C ± 15°C, holding this temperature for a min. of 2 minutes/mm thick or one hour per 25.4 mm (not less than 15 minutes) and cooled in air. Finally reheated to a uniform temperature of 565°C to 605°C, and maintain this temperature for a min. of 2 minutes/mm thick, or one hour per 25.4 mm (not less than 15 minutes), and cooled in air or water at a speed not less than 165°C/h.
NMX B-180 Grade 3 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
NMX B-180 Grade 3 Materiales equivalentes internacionales
Mostrando 6 de 10 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 10 equivalentes internacionales?
Consulte los 10 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 10Referencias cruzadas
- 6Composición
- 12Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 2Proveedores Totales