PROPRIETARY VC150 Aciers inoxydables
Mises à jour des données
Ce matériau a 770 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VC150 Composition chimique
Villares Metals, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY VC150 Propriétés physiques
Température
Ce matériau a 770 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VC150 Traitement thermique
- Forging: Heating slowly to about 760°C and wait for all material to reach that temperature; continue heating up to 1060 - 1120°C, keep at temperature until complete homogenization and start forging. Do not forge below 950°C. Reheat if necessary. After forging, cool slowly in an furnace or other dry insulating material.
Annealing: For lower hardness, it should be heated to 870 - 900°C, kept at this temperature for six hours and cooled very slowly in the oven. To improve machinability, annealing at around 760°C is recommended.
Quenching: Heat slowly to 980-1040°C, keep at temperature for about half an hour and cool in oil. Large section pieces must be preheated to around 700°C and then brought to the tempering temperature. For small parts, cooling can be done with blown air.
Tempering: It is recommended to temper steel immediately after quenching, to avoid the occurrence of thermal cracks. The tempering temperature is determined by the desired mechanical characteristics. The range between 420 and 600°C should be avoided, as tempering carried out between these temperatures tends to produce brittleness and a sharp drop in corrosion resistance.
PROPRIETARY VC150 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY VC150 Matériaux équivalents internationaux
Affichage de 15 sur 462 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 462 équivalents internationaux ?
Consultez les 462 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 462Références croisées
- 2Composition
- 1Propriétés mécaniques
- 3Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 301Fournisseurs totaux