PROPRIETARY Uddeholm Vanadis 30 SuperClean Acier pour outils
Mises à jour des données
Ce matériau a 48 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Vanadis 30 SuperClean Composition chimique
Uddeholms AB, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Vanadis 30 SuperClean Propriétés physiques
Température
Ce matériau a 48 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Vanadis 30 SuperClean Traitement thermique
- Soft annealing:
Protect the steel and heat through to 850-900°C (1560-1650°F). Then cool in the furnace at 10°C/h (20°F/h) to 700°C (1290°F), then freely in air;
Stress relieving:
After rough machining the tool should be heated through to 600-700°C (1110-1290°F), holding time 2 hours. Cool slowly to 500°C (930°F), then freely in air;
Hardening:
Pre-heating temperature: 450-500°C (840-930°F) and 850-900°C (1560-1650°F).
Austenitizing temperature: 1050-1180°C (1920-2160°F), according to the desired final hardness. The tool should be protected against decarburization and oxidation during hardening;
Quenching media:
Martempering bath at approx. 540°C (1000°F), Vacuum furnace with high speed gas at sufficient overpressure (≥ 2 bar);
Tempering:
It should always be carried out at 560°C (1040°F) irrespective of the austenitizing temperature. Temper three times for one hour at full temperature. The tool should be cooled to room temperature between the tempers. The retained austenite content will be less than 1% after this tempering cycle. - Austenitizing temperature 1180°C (2160°F).
PROPRIETARY Uddeholm Vanadis 30 SuperClean Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY Uddeholm Vanadis 30 SuperClean Matériaux équivalents internationaux
Affichage de 1 sur 12 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 12 équivalents internationaux ?
Consultez les 12 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 12Références croisées
- 6Composition
- 2Propriétés mécaniques
- 21Propriétés physiques
- 2Traitement thermique
- -Métallographie
- 1Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 4Fournisseurs totaux