PROPRIETARY No. 883 Tool Steel Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 231 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY No. 883 Tool Steel Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY No. 883 Tool Steel Propiedades físicas
Temperatura
Este material cuenta con 231 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY No. 883 Tool Steel Tratamiento Térmico
- Annealing: heat uniformly to 843/871°C (1550/1600°F), then cool very slowly in the furnace at a rate of not more than 16.7°C (30°F) per hour until the furnace is black.
Hardening: for air treating, heat the furnace to 1010/1024°C (1850/1875°F), then place the tool right in the hot furnace near the thermocouple. Let the tool heat naturally until it uniformly matches the color of the thermocouple. Soak 20 minutes plus an additional 5 minutes per 25.4 mm of thickness, then air cool. For oil treating, follow the same procedure, but drop the temperature to 996/1010°C (1825/1850°F).
Stress Relieving: first rough machine, then heat to a temperature of 649/677°C (1200/1250°F), hold for 1 hour at temperature, then slowly cool.
Tempering: full hardness is maintained up to a tempering temperature of 538°C (1000°F). For greater toughness, temper at a higher temperature.
PROPRIETARY No. 883 Tool Steel Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY No. 883 Tool Steel Materiales equivalentes internacionales
Mostrando 15 de 97 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 97 equivalentes internacionales?
Consulte los 97 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 97Referencias cruzadas
- 7Composición
- 12Propiedades mecánicas
- 27Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 87Proveedores Totales