ASTM A 522 Type I Aciers de construction
Mises à jour des données
Ce matériau a 307 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
ASTM A 522 Type I Composition chimique
A522/A522M: 2026 / Brides, raccords, vannes et pièces en acier au nickel 8% et 9 %, laminés ou forgés pour usage à basse température
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
ASTM A 522 Type I Propriétés physiques
Température
Ce matériau a 307 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
ASTM A 522 Type I Traitement thermique
- Quenching and tempering: Quenching in water: 802 ± 14°C (1475 ± 25°F), hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; quench by immersion in circulating water. Reheat until the forging attains a uniform temperature within the range from 566 - 607°C (1050 - 1125°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air or water quench, at a rate not less than 167°C/h (300°F/h).
Double Normalized and Tempered: Heat to a uniform temperature of 899°C (1650°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air. Reheat until the forging attains a uniform temperature of 788°C (1450°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air. Reheat to a uniform temperature within the range from 566 - 607°C (1050 -1125°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air or water quench, at a rate not less than 167°C/h (300°F/h).
When stress relieving is to be performed after fabrication, the recommended stress-relieving treatment is as follows: gradually and uniformly heat the steel to a temperature between 552 - 585°C (1025 - 1085°F); hold for a minimum of 2 h for thicknesses up to 25 mm. For thicknesses over 25 mm, a minimum additional holding time in the ratio of 2.5 min/mm of thickness in excess of 25 mm shall be added. Cool at a minimum rate of 167°C/h (300°F/h) to a temperature not exceeding 316°C (600°F).
ASTM A 522 Type I Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
ASTM A 522 Type I Matériaux équivalents internationaux
Affichage de 15 résultats sur 163.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 163 équivalents internationaux ?
Consultez les 163 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 163Références croisées
- 6Composition
- 8Propriétés mécaniques
- 4Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 125Fournisseurs totaux