UNI 40 NiCrMo 3 Aciers de construction
Mises à jour des données
Ce matériau a 225 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
UNI 40 NiCrMo 3 Composition chimique
UNI 7847: 1979 / Produits, barres et bobines en acier spécial laminés à chaud, non alliés et alliés, pour le durcissement de surface. Qualités, exigences et tests
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
UNI 40 NiCrMo 3 Propriétés physiques
Température
Ce matériau a 225 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
UNI 40 NiCrMo 3 Traitement thermique
- Material is normally supplied in the annealed or normalised condition. The values shown in the mechanical properties table apply to the following conditions: TC: Annealed. TD: Normalised. TF: Hardened and tempered. Spheroidised: Spheroidise annealed. Annealed: Annealed to obtain a structure with a controlled hardness. Heat treated: Normalised or hardened and tempered followed by surface hardening followed by stress relieving at 140 to 180°C for one hour (to achieve the minimum surface hardness value specified after flame or induction hardening followed by stress relieving). Anneal at 640 - 680°C. Normalise at 850 - 880°C. Harden from 830 - 860°C and temper at 540 - 680°C for at least 1 hour.
- Material is normally supplied in the hot rolled condition but, subject to agreement, may be supplied in one of the following conditions: Soft Annealed (SA) to a maximum hardness by annealing at 640 - 680°C. Spheroidise Annealed (Spheroidised). Annealed to obtain a ferritic/pearlite structure (Annealed). Hardened and Tempered (H+T). The H+T values shown in the mechanical properties table are obtained from a test piece hardened by oil quenching from 830 - 850°C followed by tempering at 550 - 650°C for at least 1 hour. The temperature of the oil must be between 15 - 60°C. The Rockwell C Scale hardness minimum value (Heat Treated condition) shown in the mechanical properties table is the surface hardness which must be obtained whether material is in the normalised condition and subsequently surface hardened or whether the material is in the hardened and tempered condition and subsequently surface hardened; Both treatments are followed by tempering at 140-180°C for approximately 1 hour. The specification gives a normalising treatment of 850 - 880°C.
UNI 40 NiCrMo 3 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
UNI 40 NiCrMo 3 Matériaux équivalents internationaux
Affichage de 15 résultats sur 94.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 94 équivalents internationaux ?
Consultez les 94 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 94Références croisées
- 16Composition
- 15Propriétés mécaniques
- 3Propriétés physiques
- 5Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 92Fournisseurs totaux