UNI 40 NiCrMo 3 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 225 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 3 Composición química
UNI 7847: 1979 / Bobinas, barras y productos de acero especial, laminado en caliente, no aleados y aleados, para endurecimiento superficial. Cualidades, requisitos y pruebas
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 3 Propiedades físicas
Temperatura
Este material cuenta con 225 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 3 Tratamiento Térmico
- Material is normally supplied in the annealed or normalised condition. The values shown in the mechanical properties table apply to the following conditions: TC: Annealed. TD: Normalised. TF: Hardened and tempered. Spheroidised: Spheroidise annealed. Annealed: Annealed to obtain a structure with a controlled hardness. Heat treated: Normalised or hardened and tempered followed by surface hardening followed by stress relieving at 140 to 180°C for one hour (to achieve the minimum surface hardness value specified after flame or induction hardening followed by stress relieving). Anneal at 640 - 680°C. Normalise at 850 - 880°C. Harden from 830 - 860°C and temper at 540 - 680°C for at least 1 hour.
- Material is normally supplied in the hot rolled condition but, subject to agreement, may be supplied in one of the following conditions: Soft Annealed (SA) to a maximum hardness by annealing at 640 - 680°C. Spheroidise Annealed (Spheroidised). Annealed to obtain a ferritic/pearlite structure (Annealed). Hardened and Tempered (H+T). The H+T values shown in the mechanical properties table are obtained from a test piece hardened by oil quenching from 830 - 850°C followed by tempering at 550 - 650°C for at least 1 hour. The temperature of the oil must be between 15 - 60°C. The Rockwell C Scale hardness minimum value (Heat Treated condition) shown in the mechanical properties table is the surface hardness which must be obtained whether material is in the normalised condition and subsequently surface hardened or whether the material is in the hardened and tempered condition and subsequently surface hardened; Both treatments are followed by tempering at 140-180°C for approximately 1 hour. The specification gives a normalising treatment of 850 - 880°C.
UNI 40 NiCrMo 3 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
UNI 40 NiCrMo 3 Materiales equivalentes internacionales
Mostrando 15 de 94 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 94 equivalentes internacionales?
Consulte los 94 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 94Referencias cruzadas
- 16Composición
- 15Propiedades mecánicas
- 3Propiedades físicas
- 5Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 92Proveedores Totales