CSN 19 152 Acier pour outils
Mises à jour des données
Ce matériau a 100 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
CSN 19 152 Composition chimique
CSN 41 9152: 1967 / Acier au carbone 19 152
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
CSN 19 152 Propriétés physiques
Température
Ce matériau a 100 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
CSN 19 152 Traitement thermique
- Forging at 1000 to 800°C, slowly cooling in still air or better, for example, in dry ash.
Normalization at 790 to 810°C, cooling in air.
Soft annealing at 680 to 710°C, heating for several hours (by piece size), usually 4 hours and slowly cooling in the oven.
Annealing to reduce stress at 600 to 650°C, 1 to 2 hours to warm up and slowly cool in the oven.
Hardening:
a) in water at 760 to 790°C, smaller and formally complex objects.
b) in water at 780 to 810°C, large and simple-looking objects.
c) in oil at 800 to 830°C, thin objects under 3 mm. Objects thicker than 3 mm when hardened into oil have a turbid layer irregular and are softer on the surface
Tempering:
at 100 to 250°C, cool in the air or in the water. The degree of tempering is governed by the necessary hardness and toughness.
CSN 19 152 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
CSN 19 152 Matériaux équivalents internationaux
Affichage de 15 résultats sur 44.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 44 équivalents internationaux ?
Consultez les 44 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 44Références croisées
- 7Composition
- 3Propriétés mécaniques
- 3Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 41Fournisseurs totaux