CSN 19 152 Tool steels
Data updates
This material has 100 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
CSN 19 152 Chemical Composition
CSN 41 9152: 1967 / Carbon steel 19 152
Looking for full material performance data?
Free registration required • Instant access
CSN 19 152 Physical Properties
Temperature
This material has 100 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
CSN 19 152 Heat Treatments
- Forging at 1000 to 800°C, slowly cooling in still air or better, for example, in dry ash.
Normalization at 790 to 810°C, cooling in air.
Soft annealing at 680 to 710°C, heating for several hours (by piece size), usually 4 hours and slowly cooling in the oven.
Annealing to reduce stress at 600 to 650°C, 1 to 2 hours to warm up and slowly cool in the oven.
Hardening:
a) in water at 760 to 790°C, smaller and formally complex objects.
b) in water at 780 to 810°C, large and simple-looking objects.
c) in oil at 800 to 830°C, thin objects under 3 mm. Objects thicker than 3 mm when hardened into oil have a turbid layer irregular and are softer on the surface
Tempering:
at 100 to 250°C, cool in the air or in the water. The degree of tempering is governed by the necessary hardness and toughness.
CSN 19 152 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
CSN 19 152 International Equivalent Materials
Showing 15 of 44 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 44 international equivalents?
See all 44 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 44Cross References
- 7Composition
- 3Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 41Total Suppliers