PROPRIETARY BeyLos 2367 Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 38 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY BeyLos 2367 Composición química
Lucchini RS, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY BeyLos 2367 Propiedades físicas
Temperatura
Este material cuenta con 38 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY BeyLos 2367 Tratamiento Térmico
- Normally supplied in the annealed condition with hardness values lower than 220 HB, if subjected to suitable hardening, it can reach a hardness of 52 HRc without affecting the toughness. Soft annealing: at 850°C, heating max 50°C/h, soaking time 120 min from when the temperature settles, cooling slow in the furnace. Stress relieving at 650°C, heating max 100°C/h, soaking time 120 min every 25 mm thickness, cooling slow in the furnace. If the suggested temperature is lower than the tempering temperature, the stress relieving temperature will be 50°C lower than the tempering temperature previously applied. Hardening: at 400°C (first pre-heating temperature), heating max 150 °C/h, soaking time 60 min every 25 mm thickness or when (Ts-Tc)<90°C; second pre-heating temperature at 600°C, heating max 150 °C/h, soaking time 45 min every 25 mm thickness or when (Ts-Tc)<90°C, third pre-heating temperature at 800°C, heating max 150 °C/h, soaking time 25 min every 25 mm thickness or when (Ts-Tc)<90°C. Austenising at 1050°C, heating > 150 °C/h, soaking time t=(x+39)/2 or 30min from when (Ts-Tc)<15°C, cooling in air, vacuum cooling, salt bath, water quench. First tempering temperature 580°C, soaking time t’=0,8x +120, cooling room temperature. Second tempering temperature set on the basis of the required mechanical properties, in any case higher than the temperature applied for the first temper, soaking time t’=0,8x +120, cooling room temperature. Third tempering temperature 30-50°C lower than the max temperature previously applied, soaking time t’=0,8x +180, cooling slow cooling in the furnace up to 250°C, then at room temperature.
PROPRIETARY BeyLos 2367 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY BeyLos 2367 Materiales Internacionales Equivalentes
Mostrando 5 de 6 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 6 internacionales equivalentes?
Consulte los grados 6 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 6Referencias cruzadas
- 6Composición
- 10Propiedades mecánicas
- 11Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 4Proveedores Totales