PROPRIETARY EskyLos 2344 Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 229 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2344 Composición química
Lucchini RS, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2344 Propiedades físicas
Temperatura
Este material cuenta con 229 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2344 Tratamiento Térmico
- Supplied in the annealed condition with hardness lower than 220 HB. Soft annealing: at 850°C, heating max 50°C/h, soaking time minimum 120 min from when the temperature settles, cooling slow in the furnace. Stress relieving at 650°C, heating max 100°C/h, soaking time minimum 120 min from when the temperature settles, cooling slow in the furnace at max 25°C/h to 200°C, then at room temperature. If the suggested temperature is lower than the tempering temperature, the stress relieving temperature will be 50°C lower than the tempering temperature previously applied. Hardening: first pre-heating t=400°C, heating max 150°C/h, soaking time 60 min every 25 mm thickness or or when (Ts-Tc)<90°C; second preheating t=600°C, heating max 150°C/h, soaking time 45 min every 25 mm thickness or or when (Ts-Tc)<90°C; third preheating t=800°C, heating max 150°C/h, soaking time 25 min every 25 mm thickness or or when (Ts-Tc) <90°C; Austenising at 1020°C, heating >150°C/h, soaking time t=(x+39)/2 or 30 min from when (Ts-Tc)<15°C, cooling air, vacuum cooling, salt bath, oil. Tempering: the first temper at 580 °C, soaking time t’=0,8x+120, cooling at room temperature; the t of the second temper must be set on the basis of the required mechanical properties, and must be higher than the t applied for the first temper, soaking time t”=0,8x+120, cooling at room temperature; A third temper at a temperature of 30-50°C below the maximum temperature previously applied, soaking time t’”=0,8x+180, slow cooling in the furnace up to 250°C, then at room temperature.
PROPRIETARY EskyLos 2344 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2344 Materiales equivalentes internacionales
Mostrando 15 de 101 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 101 equivalentes internacionales?
Consulte los 101 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 101Referencias cruzadas
- 6Composición
- 10Propiedades mecánicas
- 11Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 2Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 98Proveedores Totales