ASTM A 522 Type II Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 23 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 522 Type II Composición química
A522/A522M: 2026 / Forjados de aleación de Níquel o bridas laminadas, accesorios, válvulas y partes
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASTM A 522 Type II Propiedades físicas
Temperatura
Este material cuenta con 23 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASTM A 522 Type II Tratamiento Térmico
- Quenching and tempering: Quenching in water: 802 ± 14°C (1475 ± 25°F), hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; quench by immersion in circulating water. Reheat until the forging attains a uniform temperature within the range from 566 - 607°C (1050 - 1125°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air or water quench, at a rate not less than 167°C/h (300°F/h).
Double Normalized and Tempered: Heat to a uniform temperature of 899°C (1650°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air. Reheat until the forging attains a uniform temperature of 788°C (1450°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air. Reheat to a uniform temperature within the range from 566 - 607°C (1050 -1125°F); hold at this temperature for a minimum time of 2.5 min/mm of thickness but in no case less than 30 min; cool in air or water quench, at a rate not less than 167°C/h (300°F/h).
When stress relieving is to be performed after fabrication, the recommended stress-relieving treatment is as follows: gradually and uniformly heat the steel to a temperature between 552 - 585°C (1025 - 1085°F); hold for a minimum of 2 h for thicknesses up to 25 mm. For thicknesses over 25 mm, a minimum additional holding time in the ratio of 2.5 min/mm of thickness in excess of 25 mm shall be added. Cool at a minimum rate of 167°C/h (300°F/h) to a temperature not exceeding 316°C (600°F).
ASTM A 522 Type II Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASTM A 522 Type II Materiales equivalentes internacionales
Mostrando 3 de 4 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 4 equivalentes internacionales?
Consulte los 4 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 4Referencias cruzadas
- 6Composición
- 8Propiedades mecánicas
- 4Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales