SAE 5359 Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 22 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
SAE 5359 Composición química
SAE AMS 5359E: 1987 / Piezas fundidas de Acero, En Arena, Resistente a la corrosión y al calor 15Cr - 4.0Ni - 2.3Mo - 0.08N Térmicamente tratado por solución
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
SAE 5359 Propiedades físicas
Temperatura
Este material cuenta con 22 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
SAE 5359 Tratamiento Térmico
- Solution heat treatment: heat to 1095°C ± 10°C, hold at heat for not less than 1 hour per 25 mm of maximum section thickness and cool rapidly in air for castings with all cross-sections 25 mm and under in nominal thickness and in water or oil for castings with any cross-section greater than 25 mm. Equalized and overtempered: when specified by purchaser, castings, after heat treatment shall be heated to 760°C ± 30°C, held at heat for not less than 3 hours, cooled in air to room temperature or below, reheated to 565°C ± 15°C, held at heat for not less than 3 hours and cooled in air. Final heat treatment (FHT): after being austenite conditioned by heating to 940-1010°C, holding at heat for not less than 1 hour per 25 mm of cross-section and quenching in water or cool as rapidly as possible to room temperature, sub-zero cooled by cooling to -75°C or colder, holding at that temperature for not less than 3 hours and warming in air to room temperature and tempered by heating to 540°C ± 15°C, holding at heat for not less than 3 hours and air cooling.
SAE 5359 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
SAE 5359 Materiales Internacionales Equivalentes
Mostrando 2 de 3 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 3 internacionales equivalentes?
Consulte los grados 3 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 3Referencias cruzadas
- 10Composición
- 5Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales