SAE 5368 Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 23 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
SAE 5368 Composición química
SAE AMS 5368E: 2018 / Acero, Resistente a la corrosión y al calor, Fundición a molde perdido 15Cr - 4.0Ni - 2.3Mo - 0.09N Térmicamente tratado por solución
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
SAE 5368 Propiedades físicas
Temperatura
Este material cuenta con 23 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
SAE 5368 Tratamiento Térmico
- Solution Heat Treatment: Heat to a temperature within the range of 1024 to 1052°C (1875 to 1925°F), hold at the selected temperature within ± 14°C (±25°F) for not less than 1 h per 25 mm of maximum section thickness, and cool rapidly to room temperature. Section thicknesses over 25 mm shall either be quenched in water or oil or gas-fan cooled.After heat treatment specimens shall be heat treated as follows for subsequent testing to demonstrate response to heat treatment.
Austenite Condition: Heat to a temperature within the range of 954 to 996°C (1750 to 1825°F), hold at the selected temperature within ± 14°C (± 25°F) for not less than 1 h per 25 mm of maximum section thickness, and cool rapidly to room temperature. Section thicknesses over 25 mm shall either be quenched in water or oil or gas-fan cooled.
Sub-zero cool: Cool to below -73°C (-100°F) or lower, hold at temperature for not less than 3 h, and warm to room temperature.
Temper: Heat to 454 ± 14°C (850 ± 25°F), hold at heat for not less than 3 h, and cool in air.
SAE 5368 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
SAE 5368 Materiales Internacionales Equivalentes
Mostrando 2 de 3 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 3 internacionales equivalentes?
Consulte los grados 3 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 3Referencias cruzadas
- 11Composición
- 5Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales