SAE 5920 Cobalt Alloys
Data updates
This material has 56 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 5920 Chemical Composition
SAE AMS 5920C: 2024 / Cobalt-Nickel Alloy, Corrosion- and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb)- 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work-Strengthened, and Aged, Modified Strength
Looking for full material performance data?
Free registration required • Instant access
SAE 5920 Heat Treatments
- Bars shall be solution heat treated by heating to a temperature within the range 1038 to 1052°C (1900 to 1925°F), holding at the selected temperature within +/- 14 °C (+/- 25°F) for 4 to 8 hours, and quenching in water. After work strengthening, bars shall be aged by heating to a temperature within the range 482 to 593°C (900 to 1100°F), holding at the selected temperature within +/- 14°C (+/- 25°F) for not less than 4 hours, and cooling at a rate equivalent to an air cool or faster.
SAE 5920 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 5920 International Equivalent Materials
Showing 8 of 8 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 8 international equivalents?
See all 8 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 8Cross References
- 14Composition
- 6Mechanical Properties
- -Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 26Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers