PROPRIETARY Custom Age 625 Plus Nickel Alloys

Material group: Nonferrous Alloys / Nickel Alloys

Country / Standard: PROPRIETARY

Data updates

Latest Update: 2025-06

Total number of updates: 3

Update History

2021-09 2020-11

This material has 154 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

PROPRIETARY Custom Age 625 Plus Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

0.2

UNIT

CAS NUMBER

7429-90-5

CRITERIA

VALUE

0.02

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-89-6

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-98-7

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-03-1

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-32-6

Rolled Alloys, Product Data Sheets,

Looking for full material performance data?

PROPRIETARY Custom Age 625 Plus Physical Properties

Temperature

0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Modulus of Elasticity

185 — 207 GPa

Unlock full details

Electrical Resistivity

1.3 Ω∙mm²/m

Unlock full details

Density

7.9 — 8.8 kg/dm³

Unlock full details

Electrical Conductivity

val1 S/m

Unlock full details

Heat Capacity

val1 J/(kg∙°C)

Unlock full details

Melting Temperature

val1 °C

Unlock full details

Poisson Coefficient

val1

Unlock full details

This material has 154 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

PROPRIETARY Custom Age 625 Plus Heat Treatments

Solution treating: 1038°C (1900°F) 1 - 2 hr then air cool.
Single aging: 732°C (1350°F) for 4 to 8 hr.
Direct aging: there is not solution treating prior to aging. Conventional double aging treatment of 732°C (1350°F) 8 hours, followed by furnace cooling to 621°C (1150°F) and holding at heat for 8 hours, followed by an air cool to room temperature.
Double aging: primary age at 718 - 746°C (1325 - 1375°F) for 8 hours, followed by furnace cooling 55°C (100°F) per hour to 621°C (1150°F) and holding at heat for 8 hours, then allowing the material to air cool to room temperature. To achieve the popular yield strength range between 827 and 965 MPa requires selection of 732°C (1350°F) as the primary aging temperature. Selecting 718°C (1325°F) will produce a slightly lower yield strength range. Selecting 746°C (1375°F) will produce a slightly higher yield strength range.

PROPRIETARY Custom Age 625 Plus Mechanical Properties

Temperature

≤ 0°C 0 - 30°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Tensile Strength

834 — 1855 MPa

Unlock full details

Elongation, A

val1 %

Unlock full details

Reduction of Area

val1 %

Unlock full details

Rockwell Hardness (HR)

val1

Unlock full details

Yield Strength, Rp0.2

val1 MPa

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

PROPRIETARY Custom Age 625 Plus International Equivalent Materials

Showing 3 of 3 results.

MATERIAL

STANDARD

COUNTRY / PRODUCER

EQUIVALENCE CATEGORY

MATERIAL

N07716

STANDARD

UNS

COUNTRY / PRODUCER

United States

EQUIVALENCE CATEGORY

Official

MATERIAL

B 805 N07716

STANDARD

ASTM

COUNTRY / PRODUCER

United States

EQUIVALENCE CATEGORY

Composition 100%

MATERIAL

5854

STANDARD

SAE

COUNTRY / PRODUCER

United States

EQUIVALENCE CATEGORY

Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 3 international equivalents?

See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

3Cross References

20Composition
86Mechanical Properties
24Physical Properties
1Heat Treatment
-Metallography
-Machinability

12Stress-Strain
-Formability
2Fatigue
-Fracture
2Creep

-Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

4Total Suppliers