SAE 5854 Nickel Alloys
Data updates
This material has 56 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 5854 Chemical Composition
SAE AMS 5854D: 2025 / Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Rings, Extrusions, and Stock for Forgings and Rings, 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe (Alloy 716), Consumable Electrode or Vacuum Induction Melted, Solution Heat Treated
Looking for full material performance data?
Free registration required • Instant access
SAE 5854 Physical Properties
Temperature
This material has 56 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 5854 Heat Treatments
- Bars, forgings, and flash welded rings shall be solution heat treated by heating to a temperature within the range 1010-1066°C (1850-1950°F), holding at the selected temperature within ± 14°C (± 25°F) for a time commensurate with cross-sectional thickness, and cooling at a rate equivalent to air cooling.
Precipitation heat treated by heating to a temperature within the range 718-746°C (1325-1375°F), holding at the selected temperature within ± 8°C (± 15°F) for not less than 8 hours, cooling at a rate of 55°C ± 8°C (100°F ± 15°F) degrees per hour to 621°C ± 8°C (1150°F ± 15°F), holding at 621°C ± 8°C (1150°F ± 15°F) for not less than 8 hours, and cooling at a rate equivalent to air cooling. Instead of the 55°C (100°F) degrees per hour cooling rate to 621°C ± 8°C (1150°F ± 15°F), product may be furnace cooled at any rate provided the time at 621°C ± 8°C (1150°F ± 15°F) is adjusted to give a total precipitation heat treatment time of not less than 18 hours.
SAE 5854 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 5854 International Equivalent Materials
Showing 3 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 13Composition
- 8Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 26Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers