ASTM A 1014 N07718 Nickel Alloys

Material group: Nonferrous Alloys / Nickel Alloys
Country / Standard: United States / ASTM

Data updates

Latest Update: 2022-03
Total number of updates: 2
Update History
2018-04

This material has 589 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

ASTM A 1014 N07718 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
0.20 – 0.80
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
B
VALUE
≤ 0.006
UNIT
%
CAS NUMBER
7440-42-8
CRITERIA
C
VALUE
≤ 0.08
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Co
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-48-4
CRITERIA
Cr
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Nb+Ta
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Ni+Co
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6

A1014/A1014M: 2016 / Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

ASTM A 1014 N07718 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
185 — 208.8 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
val1
Full data available with free access View Complete Material Data
Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Heat Capacity
val1
Full data available with free access View Complete Material Data
J/(kg∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Dynamic Modulus of Elasticity
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Melting Temperature
val1
Full data available with free access View Complete Material Data
°C
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data

This material has 589 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

ASTM A 1014 N07718 Heat Treatments

  • Solution treatment: 940 - 1010°C, (1725-1850°F) held at the selected temperature for a time commensurate with cross-sectional thickness, and cooled at a rate equivalent to an air cool or faster.

    Temperature Variation: Solution treating temperatures shall be controlled in the range of ± 14 °C (±25°F). Precipitation treatment: It shall be heated to 720°C (1325°F), held at temperature for eight hours minimum, furnace cooled to 620°C (1150°F) at 56°C (100°F) per hour, and cooled to room temperature. It may be furnace cooled to 620°C (1150°F) at any rate provided the time at 620°C (1150°F) is is adjusted so the total precipitation heat treatment time is 18 hours minimum.

    Temperature Variation: Precipitation treatment temperatures and cooling rates shall be controlled in the range of ± 8°C (± 15°F).

    Straightening: When straightening is necessary it shall be done after solution treating and prior to aging. Straightening after aging is prohibited.

ASTM A 1014 N07718 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 1275 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Grain Size
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Reduction of Area
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

ASTM A 1014 N07718 International Equivalent Materials

Showing 15 of 147 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
N07718
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
Inconel alloy 718
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
Alloy 718
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SB-637 N07718
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
ERNiFeCr-2
STANDARD
AWS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
B 637 N07718
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
B 670 N07718
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
B 983 N07718
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
H07718
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
NS4301
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
Nistelle 718
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
HAYNES 718
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
ALTEMP 718
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
VDM alloy 718
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
Inconel 718
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 147 international equivalents?

See all 147 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 147Cross References
  • 15Composition
  • 66Mechanical Properties
  • 229Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • 2Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • 20Irradiation
  • 109Total Suppliers