PROPRIETARY VDM alloy K-500 Nickel Alloys

Material group: Nonferrous Alloys / Nickel Alloys
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2021-08
Total number of updates: 3
Update History
2017-05 2015-12

This material has 146 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY VDM alloy K-500 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
2.3 – 3.15
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
≤ 0.18
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cu
VALUE
27 – 33
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
Pb
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-92-1
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Sn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-31-5
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

VDM Metals GmbH, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY VDM alloy K-500 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
179 — 205 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
val1
Full data available with free access View Complete Material Data
Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Heat Capacity
val1
Full data available with free access View Complete Material Data
J/(kg∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 146 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY VDM alloy K-500 Heat Treatments

  • Annealing is conducted in the temperature range from 850 to 1000°C (1562 to 1832°F) with retention times between 3 and 5 minutes per mm thickness and preferably in 980°C (1796°F). Temperatures above 1000°C (1832°F) are not recommendable because strong grain growth can occur. Cooling down in water or accelerated cooling down in the air with thicknesses of less than 3 mm (0.12 in) or diameters of less than 12.5 mm (0.49 in) is recommendable and important so to avoid precipitations. The tension compensation achieved by retention times of 1 to 2 hours at 300 to 350°C (572 to 662°F) with subsequent cooling down in the air is necessary to remove the tension concentration from material that has been machined before the age hardening.

PROPRIETARY VDM alloy K-500 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 930 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Impact Strength
val1
Full data available with free access View Complete Material Data
kJ/m²
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

PROPRIETARY VDM alloy K-500 International Equivalent Materials

Showing 15 of 32 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
NiCu30Al3Ti
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NW5500
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NiCu30Al3Ti
STANDARD
KS
COUNTRY / PRODUCER
Korea
EQUIVALENCE CATEGORY
Implicit
MATERIAL
F 468W Ni500
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NCu30-3-0.5
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NW5500
STANDARD
KS
COUNTRY / PRODUCER
Korea
EQUIVALENCE CATEGORY
Implicit
MATERIAL
Nickelvac K500
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SF-468 Ni500
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SF-467 Ni500
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
F 467 Ni500
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NiCu30Al3Ti
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NW5500
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Implicit
MATERIAL
NCuATB
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Implicit
MATERIAL
Monel alloy K-500
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit
MATERIAL
Monel K500
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 32 international equivalents?

See all 32 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 32Cross References
  • 13Composition
  • 19Mechanical Properties
  • 65Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • 2Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 14Total Suppliers