ASTM B 367 Grade C-5 Titanium Alloys
Data updates
This material has 4506 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM B 367 Grade C-5 Chemical Composition
B367: 2022 / Standard Specification for Titanium and Titanium Alloy Castings
Looking for full material performance data?
Free registration required • Instant access
ASTM B 367 Grade C-5 Physical Properties
Temperature
This material has 4506 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM B 367 Grade C-5 Heat Treatments
- Castings will be supplied in the as-cast condition except when post-weld heat treatment is required. If it is required, it shall consist of a stress relief performed at 650 ± 14°C (1200 ± 25°F). Time at temperature shall be a minimum of 0.5 h plus an additional 0.5 h at temperature per 25 mm of thickness for section sizes greater than 25 mm. After heat treatment, the castings should be cooled in air or in the furnace to ambient temperature unless otherwise agreed upon between the purchaser and producer.
ASTM B 367 Grade C-5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM B 367 Grade C-5 International Equivalent Materials
Showing 15 of 127 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 127 international equivalents?
See all 127 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 127Cross References
- 10Composition
- 5Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 1Dimensions
- -Tribology
- 4283Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 77Total Suppliers