B.S. NA 18 Nickel Alloys
Data updates
This material has 180 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. NA 18 Chemical Composition
BS 3072: 1989 / Specification for nickel and nickel alloys: sheet and plate
Looking for full material performance data?
Free registration required • Instant access
B.S. NA 18 Physical Properties
Temperature
This material has 180 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. NA 18 Heat Treatments
- Solution treatment: The material is normally solution treated by maintaining it at a temperature within the range 980°C to 1050°C for a period up to 30 min followed by rapid cooling.
Precipitation treatment: The material is normally precipitation treated within the temperature range of 580°C to 600°C for 6 h to 16 h followed by furnace cooling to 480°C at a rate between 8°C/h and 14°C/h. The rate of cooling below 480°C is not important. - Solution treated at 980 - 1050°C, up to 30 min, followed by rapid cooling.
Precipitation treated at 580 - 600°C for 6 - 16h, followed by furnace cooling to 480°C at a rate between 8°C/h and 15°C/h.
B.S. NA 18 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. NA 18 International Equivalent Materials
Showing 15 of 28 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 28 international equivalents?
See all 28 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 28Cross References
- 48Composition
- 72Mechanical Properties
- 4Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 4Joints
- -Coatings
- 4Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 15Total Suppliers