AA 2011 Aluminium Alloys
Material group:
Nonferrous Alloys / Aluminium Alloys
Country / Standard:
United States / AA
Indicative price:
Data updates
Latest Update: 2021-02
Total number of updates: 5
Update History
2020-07
2019-04
2016-02
2013-11
This material has 469 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
AA 2011 Chemical Composition
CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Bi
VALUE
0.20 – 0.6
UNIT
%
CAS NUMBER
7440-69-9
CRITERIA
Cu
VALUE
5.0 – 6.0
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Other each
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Pb
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7439-92-1
CRITERIA
Si
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Zn
VALUE
val1
Full data available with free access
View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6
International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025
Looking for full material performance data?
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
AA 2011 Physical Properties
Temperature
Modulus of Elasticity
69 — 79
GPa
Unlock full details
Full data available with free access
View Complete Material Data
Electrical Resistivity
0.038 — 0.0442
Ω∙mm²/m
Unlock full details
Full data available with free access
View Complete Material Data
Density
Unlock full details
Full data available with free access
View Complete Material Data
Electrical Conductivity
Unlock full details
Full data available with free access
View Complete Material Data
Melting Temperature
Unlock full details
Full data available with free access
View Complete Material Data
Thermal Conductivity
142.256 — 172
W/(m∙°C)
Unlock full details
Full data available with free access
View Complete Material Data
Poisson Coefficient
val1
Full data available with free access
View Complete Material Data
Unlock full details
Full data available with free access
View Complete Material Data
This material has 469 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
View Complete Material Data ›
Free registration required • Instant access
Free registration required • Instant access
AA 2011 Heat Treatments
- The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.
The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.
The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.
Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.
For rolled or cold finished wire, rod and bar
Temper T3: Solution heat treated at 525°C, quenched, naturally aged. Cold work subsequent to solution heat treatment is required to attain the specified mechanical properties for this temper.
Temper T4: Solution heat treated at 525°C, quenched, naturally aged.
Temper T451: Solution heat treated at 525°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.
Temper T8: Solution heat treated at 525°C, quenched, precipitation heat treated at 160°C for 14 hours. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.
For drawn tube
Temper T3: Solution heat treated at 515°C, quenched, naturally aged. Cold work subsequent to solution heat treatment is required to attain the specified mechanical properties for this temper.
Temper T4511: Solution heat treated at 515°C, quenched, naturally aged. Stress-relieved by stretching is required to produce a specified amount of permanent set subsequent to solution heat treatment.
Temper T8: Solution heat treated at 515°C, quenched, precipitation heat treated at 155°C for 14 hours. Cold work prior to any precipitation heat treatment is required to attain the specified mechanical properties for this temper.
AA 2011 Mechanical Properties
Temperature
Tensile Strength
≥ 275
MPa
Unlock full details
Full data available with free access
View Complete Material Data
Elongation, A
Unlock full details
Full data available with free access
View Complete Material Data
Yield Strength, Rp0.2
Unlock full details
Full data available with free access
View Complete Material Data
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
View Complete Material Data ›
Book A Demo
Free registration required • Instant access
Free registration required • Instant access
AA 2011 International Equivalent Materials
Showing 15 of 92 results.
MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
STANDARD
CSN
COUNTRY / PRODUCER
Czech Republic
EQUIVALENCE CATEGORY
Official
MATERIAL
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Official
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 92 international equivalents?
See all 92 equivalent grades with detailed mapping by standard, producer and equivalence category.
View All Equivalents ›
Book A Demo
Free registration required • Instant access
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 92Cross References
- 18Composition
- 117Mechanical Properties
- 46Physical Properties
- 1Heat Treatment
- 2Metallography
- -Machinability
- 11Stress-Strain
- -Formability
- 21Fatigue
- -Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- 92Ageing
- -Weatherability
- -Irradiation
- 68Total Suppliers