GOST S34700 Stainless steels
Data updates
This material has 694 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
GOST S34700 Chemical Composition
GOST R 71798: 2024 / Pipes of austenitic chromium-nickel stainless steel, welded by electric fusion welding, for high temperature service and general applications. Specification
Looking for full material performance data?
Free registration required • Instant access
GOST S34700 Physical Properties
Temperature
This material has 694 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
GOST S34700 Heat Treatments
- ≥ 1040°C, quenching in water or accelerated cooling by other means;
Heat treatment at temperatures above 1065°C may impair their resistance to intercrystalline corrosion. - Annealed at > 1040°C, quenching in water or accelerated cooling by other means. The cooling rate must be sufficient to prevent re-deposition of carbides.
Solution annealing at temperatures above 1065°C may degrade the intergranular corrosion resistance after further exposure to sensitizing conditions. At customer's request, solution annealing at high temperatures may be followed by re-annealing or stabilization at a lower temperature.
GOST S34700 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
GOST S34700 International Equivalent Materials
Showing 15 of 573 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 573 international equivalents?
See all 573 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 573Cross References
- 48Composition
- 23Mechanical Properties
- 3Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 22Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 20Total Suppliers