PROPRIETARY 2343 ISO-B Tool steels
Data updates
This material has 221 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 2343 ISO-B Chemical Composition
Buderus Edelstahl GmbH, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 2343 ISO-B Physical Properties
Temperature
This material has 221 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 2343 ISO-B Heat Treatments
- Stress relieving:
Temperature: Approx. 650 °C in the annealed state Approx. 30–50 °C below the tempering temperature in the hardened and tempered state
Duration: 1 hour per 50 mm wall thickness
Cooling: Furnace
Soft annealing:
Temperature: 820°C
Duration: 1 hour per 25 mm wall thickness
Cooling: Furance
Hardening:
Temperature: 1010°C
Duration: 30 seconds per mm wall thickness
Quenching hardness: Max. 55 HRC (in oil, hot bath, protective atmosphere, vacuum or air)
Tempering:
Temperature: See tempering curve
Duration:1 hour per 25 mm wall thickness
Cooling: Air
Working hardness: 30–50 HRC (depending on application)
PROPRIETARY 2343 ISO-B Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 2343 ISO-B International Equivalent Materials
Showing 15 of 99 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 99 international equivalents?
See all 99 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 99Cross References
- 8Composition
- 9Mechanical Properties
- 12Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 91Total Suppliers