PROPRIETARY BÖHLER W320 ISODISC Tool steels
Data updates
This material has 171 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W320 ISODISC Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER W320 ISODISC Physical Properties
Temperature
This material has 171 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W320 ISODISC Heat Treatments
- Annealing: 750-800°C (1382-1472°F); Holding time 6 to 8 hours. Slow, controlled furnace cooling at 10 to 20°C/h (18 to 36 °F/hr) to approx. 600°C (1112°F), further cooling in air.
Stress relieving: 600-670°C (1112-1238°F); For stress relief after extensive machining or for complicated tools. Holding time depending on tool size after complete heating 2 - 6 hours in neutral atmosphere. Slow furnace cooling.
Hardening and tempering: 1010-1050°C (1850-1922°F); Holding time after temperature equalization: 15 to 30 minutes; Quenching: Oil, salt bath (500-550°C [932-1022°F]), air, vacuum; After hardening, tempering to the desired working hardness.
PROPRIETARY BÖHLER W320 ISODISC Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER W320 ISODISC International Equivalent Materials
Showing 15 of 76 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 76 international equivalents?
See all 76 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 76Cross References
- 6Composition
- 6Mechanical Properties
- 16Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 66Total Suppliers