PROPRIETARY UR 2205 Arctic Stainless steels
Data updates
This material has 335 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 2205 Arctic Chemical Composition
Industeel, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UR 2205 Arctic Physical Properties
Temperature
This material has 335 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 2205 Arctic Heat Treatments
- Hot forming: it shall be performed between 1150 and 950°C (2102 - 1750°F) after the piece has been uniformly heated. At temperatures lower than 950°C (1750°F), embrittlement can occur due to intermetallic phase precipitations, especially when the material is strained. After hot forming, a solution annealing heat treatment in the range 1040 - 1080°C (1904 - 1975°F) or 1080 - 1090°C (1975 - 1995°F) if welded, with water cooling is necessary to restore phase balance, mechanical and corrosion resistance properties.
Cold forming: a heat treatment (solution annealing between 980 and 1080°C (1800 and 1975°F) followed by water-cooling is always required when the final deformation by cold forming exceeds 10%. For cold deformation higher than 20%, an intermediate full-annealing heat treatment is required.
PROPRIETARY UR 2205 Arctic Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY UR 2205 Arctic International Equivalent Materials
Showing 15 of 173 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 173 international equivalents?
See all 173 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 173Cross References
- 5Composition
- 31Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 122Total Suppliers