VdTÜV T/P921 Structural and constructional steels
Data updates
This material has 85 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
VdTÜV T/P921 Chemical Composition
WB 588: 2021 / Heat-resistant steel T/P921 X10CrSiCuMoNi9-2-1, Material No. 1.7392 Seamless tube
Looking for full material performance data?
Free registration required • Instant access
VdTÜV T/P921 Physical Properties
Temperature
This material has 85 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
VdTÜV T/P921 Heat Treatments
- Hardening: Heating at 910-950°C, cooling in air.
Tempering: Heating at 730-770°C, holding for at least 60 minutes, cooling in air.
Annealing temperature after welding and cold forming: 710 to 770°C. For wt ≤ 8 mm, hold at least 30 min, for 8 < wt ≤ 25 mm, hold at least 60 min. Cooling in air.
Hot forming operations should be carried out in the range 1200 °C to 850°C. Hot forming operations such as forging and upsetting are suitably carried out between 1200°C and 950°C. After forming, cooling can be performed in still air.
VdTÜV T/P921 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
VdTÜV T/P921 International Equivalent Materials
Showing 6 of 6 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 6 international equivalents?
See all 6 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 6Cross References
- 11Composition
- 35Mechanical Properties
- 22Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 10Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers