ASME SA-988 S41000 Stainless steels
Data updates
This material has 101 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-988 S41000 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-988 S41000 Physical Properties
Temperature
This material has 101 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-988 S41000 Heat Treatments
- Class 1:
Heat treatment type: Annealed.
Cooling media: Furnace cooled.
Heat treatment type: Normalized and tempered.
Cooling media: Air cooled.
Quenching (cool to below): 205°C (400°F).
Tempering temperature (min): 725°C (1325°F).
Heat treatment type: Tempered.
Tempering temperature (min): 725°C (1325).
Class 2:
Heat treatment type: Annealed.
Cooling media: Furnace cooled.
Heat treatment type: Normalized and tempered.
Cooling media: Air cooled.
Quenching (cool to below): 205°C (400°F).
Tempering temperature (min): 675°C (1250°F).
Heat treatment type: Tempered.
Tempering temperature (min): 675° (1250°F).
Class 3:
Heat treatment type: Annealed.
Cooling media: Furnace cooled.
Heat treatment type: Normalized and tempered.
Cooling media: Air cooled.
Quenching (cool to below): 205°C (400°F).
Tempering temperature (min): 595°C (1100°F).
Class 4:
Heat treatment type: Annealed.
Cooling media: Furnace cooled.
Heat treatment type: Normalized and tempered.
Cooling media: Air cooled.
Quenching (cool to below): 205°C (400°F).
Tempering temperature (min): 540°C (1000°F).
ASME SA-988 S41000 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-988 S41000 International Equivalent Materials
Showing 15 of 54 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 54 international equivalents?
See all 54 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 54Cross References
- 6Composition
- 20Mechanical Properties
- 5Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 5Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 10Total Suppliers