PROPRIETARY HG 2510 Tool steels
Data updates
This material has 137 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY HG 2510 Chemical Composition
Cold Work Tool Steels, HG2510, Huang Limited, 2017
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY HG 2510 Physical Properties
Temperature
This material has 137 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY HG 2510 Heat Treatments
- Forging:
Heat slowly and begin forging at 980-1000°C. Do not forge below 800°C. After forging cool slowly preferably in a furnace.
Soft Annealing:
Heat the tool steel slowly to 740-760°C, cool slowly in furnace.
Stress Relieving:
When heavily machined, ground or otherwise subject to cold work, stress relieving will be beneficial prior to hardening. Heat the component carefully to 670-700°C, soak well and allow cooling in air.
Hardening:
Harden from a temperature of 780-820°C followed by oil, warm bath (180-220°C) quenching.
Tempering:
Tempering is always necessary after hardening. Temper between 100°C-350°C. Soak well at the selected temperature and soak for at least one hour per 25mm of total thickness.
PROPRIETARY HG 2510 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY HG 2510 International Equivalent Materials
Showing 15 of 64 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 64 international equivalents?
See all 64 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 64Cross References
- 8Composition
- 2Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 58Total Suppliers