PROPRIETARY BÖHLER K460 Tool steels
Data updates
This material has 164 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER K460 Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER K460 Physical Properties
Temperature
This material has 164 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER K460 Heat Treatments
- Annealing: 710-750°C (1310-1382°F); Slow controlled cooling in furnace at a rate of 10 to 20°C/hr (18 to 36°F/hr) down to approx. 600°C (1112°F), further cooling in air.
Stress relieving: 650°C (1202°F); slow cooling in furnace; intended to relieve stresses set up by extensive machining, or in complex shapes; after through heating, hold in neutral atmosphere for 1-2 hours.
Hardening and tempering: 780-820°C (1436-1508°F); Oil. Salt bath 200-250°C (392-482°F), up to 20 mm (0.787 inch) thickness. Holding time after temperature equalization: 15 to 30 minutes. After hardening, tempering to the desired working hardness, see tempering chart.
PROPRIETARY BÖHLER K460 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER K460 International Equivalent Materials
Showing 15 of 71 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 71 international equivalents?
See all 71 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 71Cross References
- 6Composition
- 6Mechanical Properties
- 14Physical Properties
- 4Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 63Total Suppliers