PROPRIETARY Böhler W400 VMR Tool steels
Data updates
This material has 223 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Böhler W400 VMR Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Böhler W400 VMR Physical Properties
Temperature
This material has 223 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Böhler W400 VMR Heat Treatments
- Annealing: 750-800°C (1382-1472°F); Holding time 6 to 8 hours. Slow, controlled furnace cooling at 10 to 20°C/h (18 to 36°F/hr) to approx. 600°C (1112°F), further cooling in air.
Stress relieving: 600-670°C (1112-1238°F); For stress relief after extensive machining or for complicated tools. Holding time depending on tool size after complete heating 2-6 hours in neutral atmosphere. Slow furnace cooling.
Hardening and tempering: 980-990°C (1796-1814°F); Holding time after temperature equalization: 15 to 30 minutes; In order to prevent coarsening of the grain, hardening must be carried out at the recommended temperature; Quenching: oil, salt bath (500-550°C [930 to 1020°F]), air, inert gas in vacuum; After hardening, required tempering treatment to achieve desired working hardness.
PROPRIETARY Böhler W400 VMR Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Böhler W400 VMR International Equivalent Materials
Showing 15 of 104 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 104 international equivalents?
See all 104 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 104Cross References
- 6Composition
- 1Mechanical Properties
- 13Physical Properties
- 3Heat Treatment
- -Metallography
- 1Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 95Total Suppliers