PROPRIETARY SIHARD 2080 Tool steels
Data updates
This material has 166 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2080 Chemical Composition
SIJ Metal Ravne, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SIHARD 2080 Physical Properties
Temperature
This material has 166 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2080 Heat Treatments
- Soft annealing: Heat to 800-840°C, cool slowly. This will produce a maximum Brinell hardness of 250. To secure uniform softness.
Stress relieving: Stress relieving to remove machining stresses should be carried out by heating to 650°C, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening: Harden from a temperature of 940-980°C followed by oil quenching or warm bath approx. 400°C. Hardness after quenching is 64-66 HRC.
Tempering temperature: 150-400°C.
PROPRIETARY SIHARD 2080 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SIHARD 2080 International Equivalent Materials
Showing 15 of 70 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 70 international equivalents?
See all 70 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 70Cross References
- 4Composition
- 6Mechanical Properties
- 16Physical Properties
- 4Heat Treatment
- -Metallography
- 1Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 65Total Suppliers