PROPRIETARY 20CrMo5 Structural and constructional steels
Data updates
This material has 245 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 20CrMo5 Chemical Composition
Lucefin, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 20CrMo5 Physical Properties
Temperature
This material has 245 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 20CrMo5 Heat Treatments
- Hot-forming at 1050 to 850°C.
Core hardening at 850°C, water, oil, polymer.
Tempering (+T) at 450 to 600°C.
Carburizing at 860 to 900°C, oil, polymer.
Tempering at 180 to 200°C.
Soft annealing (+A) at 680 to 700°C 15°C/h to 600°C than air.
Transformation annealing (FP) at 900-1000°C.
Intermediate annealing at 650 to 680°C .
End quench hardenability at 860°C, water.
Pre-heating welding (welding must be carried out on the annealed state and before carburizing) at 200 to 300°C.
Mechanical properties at different tempering temperatures obtained after quenching at 850°C in water.
PROPRIETARY 20CrMo5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 20CrMo5 International Equivalent Materials
Showing 15 of 101 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 101 international equivalents?
See all 101 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 101Cross References
- 7Composition
- 38Mechanical Properties
- 10Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 3Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 84Total Suppliers