PROPRIETARY CHRONIFER M-13 (1.4034) Stainless steels
Data updates
This material has 834 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CHRONIFER M-13 (1.4034) Chemical Composition
L. Klein SA, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CHRONIFER M-13 (1.4034) Physical Properties
Temperature
This material has 834 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CHRONIFER M-13 (1.4034) Heat Treatments
- Forming: Warm: forging: 950 – 1100°C, slow furnace cooling; Above 1050°C: danger of rapid grain growth Cold: relatively difficult, not recommended. Annealing: Soft anneal: 750 – 830°C / 2-4h, slow furnace cooling 30°C/h down to 600°C Quenching: Primary quenching: 1000-1050°C / oil, or fast air or gas cooling Optional: secondary quenching by sub-zero cooling -20 down to -80°C/12 – 48h, preferably -80°C/12 – 24 or cryo-treatment (deep cryo-cooling): -196°C/6 – 12h, progressive cooling or step by step cooling, to avoid cracking. Tempering according to needs. Not recommended temperature range: 400 – 580°C (brittleness range) and in-creased risk of inter-granular corrosion.
PROPRIETARY CHRONIFER M-13 (1.4034) Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CHRONIFER M-13 (1.4034) International Equivalent Materials
Showing 15 of 494 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 494 international equivalents?
See all 494 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 494Cross References
- 7Composition
- 4Mechanical Properties
- 17Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 311Total Suppliers