PROPRIETARY Carpenter VIM-VAR 52100 Structural and constructional steels
Data updates
This material has 92 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Carpenter VIM-VAR 52100 Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Carpenter VIM-VAR 52100 Physical Properties
Temperature
This material has 92 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Carpenter VIM-VAR 52100 Heat Treatments
- Normalizing: Heat to 1700°F (927°C), then air cool. Annealing: Heat uniformly to 1425°F (775°C), then cool slowly in the furnace. Brinell hardness will be 223 maximum with a spheroidized structure. Hardening: For sections up to 1" (25.4 mm) in diameter or thickness, heat to 1530/1550°F (832/843°C), then oil quench. For sections over 1" (25.4 mm) in diameter or thickness, heat to 1475/1500°F (802/816°C), then water quench. An interrupted quench from water into oil as soon as the first violent vibration on the tongs is over is suggested. Tempering: The hyperlink entitled "Tempering" illustrates Rockwell C hardness values which may be expected by tempering VIM-VAR 52100 for 1 hour at various temperatures.
PROPRIETARY Carpenter VIM-VAR 52100 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Carpenter VIM-VAR 52100 International Equivalent Materials
Showing 15 of 28 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 28 international equivalents?
See all 28 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 28Cross References
- 5Composition
- 32Mechanical Properties
- 6Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 4Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 16Total Suppliers