AFCEN 18 MND 5 Structural and constructional steels
Data updates
This material has 566 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFCEN 18 MND 5 Chemical Composition
M 2115: RCC-M II: 2024 / 18 MND 5 manganese-nickel-molybdenum alloy steel forgings for PWR steam generator tube plates
Looking for full material performance data?
Free registration required • Instant access
AFCEN 18 MND 5 Physical Properties
Temperature
This material has 566 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFCEN 18 MND 5 Heat Treatments
- Austenitizing at a temperature between 850 and 925°C, quenching by immersion in water, tempering at a temperature selected so as to obtain the required properties, followed by still air cooling. Nominal holding temperature for tempering shall be between 635°C and 665°C. Holding time shall be selected depending on head thickness on the minimum basis of 0.5h for every 25 mm in thickness.
- Austenitizing at a temperature between 850°C and 925°C, quenching by immersion in water, tempering at a temperature selected so as to obtain the required properties, followed by still air cooling. Holding temperature for tempering shall be between 635°C and 665°C.
AFCEN 18 MND 5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFCEN 18 MND 5 International Equivalent Materials
Showing 15 of 55 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 55 international equivalents?
See all 55 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 55Cross References
- 89Composition
- 259Mechanical Properties
- 94Physical Properties
- 10Heat Treatment
- 2Metallography
- -Machinability
- 14Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 43Total Suppliers