PROPRIETARY ASP 23S Structural and constructional steels
Data updates
This material has 164 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY ASP 23S Chemical Composition
Erasteel, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY ASP 23S Physical Properties
Temperature
This material has 164 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY ASP 23S Heat Treatments
- Soft annealing in a protective atmosphere at 850 - 900°C for 3h, slow cooling at 10°C/h down to 700°C, air cooling. Stress-relieving at 600 - 700°C for approximately 2h, slow cooling down to 500°C. Hardening in a protective atmosphere with pre-heating at 450 - 500°C and 850 - 900°C and austenitising at a temperature suitable for chosen working hardness. Cooling down to 40 - 50°C. Tempering at 560°C three times for at least 1h each time. Cooling to room temperature (25°C) between temperings. Surface treatment: Good substrate material for PVD and CVD coating. If nitriding is requested a small zone of 2 - 15 µm is recommended. The steel grade can also be steam-tempered if so desired.
PROPRIETARY ASP 23S Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY ASP 23S International Equivalent Materials
Showing 15 of 74 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 74 international equivalents?
See all 74 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 74Cross References
- 7Composition
- 3Mechanical Properties
- 17Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 62Total Suppliers